It is very important to maintain the mask equipment after purchasing it. First of all, the maintenance is done well, the equipment operates smoothly, and the manufactured masks meet the standards. Doing this detail well will have a huge impact on the area. Let’s check the common problems and solutions for folding mask machines:

1. Appearance:

Masks are what we wear on our faces, and some even have to be used in the operating room. Therefore, the production of masks requires a folding mask machine to be cleaned every day. You can organize personnel to clean the work surface of the equipment and the plate holding the mask after getting off work every day after shutting down the power. Be careful not to use water or oil. You can use other non-toxic and volatile cleaning fluids such as alcohol.

2. Ultrasonic system: folding mask machine

Check whether the ultrasonic system is clean, especially the ultrasonic electric box, ultrasonic transducer, and welding head must be cleaned dry and without water, and whether the connecting wires are healthy. Always check the wear degree of the ultrasonic welding head (mold). When folding the mask machine, pay attention to check whether the voltmeter and ammeter pointers on the ultrasonic electric box are normal.

3. Transmission system:

The transmission system includes motors, gears, reducers, sprockets, chains, conveyor belts and other components. Maintenance of the folding mask machine requires checking whether there is dust or other things on the surface of the motor that affects heat dissipation, whether the gears and sprockets are oiled, and whether there are attachments . Check whether the tightness of the chain is appropriate, whether there are foreign objects, whether the connecting screws of each transmission part are loose, etc. Is the lubricating oil of the reducer enough? Usually the lubricating oil needs to be replaced every 1000 hours to 1500 hours.

4. Electrical system: folding mask machine

Check whether the circuit connectors of the folding mask machine equipment are loose, whether the main power cord, branch signal wires, etc. are worn, aged, or loose? Is the inside of the electrical box clean and dry, whether the exhaust fan is working normally, etc. Folding mask machine

Five: Pneumatic system:

Check whether there is water in the air filter? Check whether there is any air leakage in the air pipe? Is there any air leakage in the cylinder? Are the position and operation of the cylinder magnetic sensor sensor normal?

Others: The equipment should not come into contact with corrosive liquids and objects. For example, sweat can easily cause equipment parts to rust. If the equipment is not used for a long time, anti-rust oil must be applied to the transmission system and rust-prone parts of the folding mask machine.

Folding mask machine manufacturers maintain mask production equipment according to the above requirements, which can not only reduce the number of repairs of the folding mask machine, but also increase the working life of the folding mask machine, thus improving the company's production efficiency.