Product Description

1. Equipment

1. 1 fully automatic surgical gown body machine

2. Body non-woven fabric material position (including tension and correction mechanism) 1 set

3. Traction mechanism 7 sets

4. SMS layer fabric feeding position (including tension and correction mechanism) 1 set

5. SMS layer fabric rolling and cutting mechanism 1 set

6. 1 set of SMS layer cloth glue spraying mechanism (including 4 sets of nozzles)

7. SMS layer fabric suction feeding and conveying 1 set

8. Edge folding welding mechanism 1 set

9. Lace discharge position/lace folding and welding mechanism/lace pulling mechanism/lace body welding mechanism, 6 sets each

10. Collar punching mechanism 1 set

11. Body folding mechanism 1 set

12. Shoulder seam welding mechanism 1 set

13. Body rolling cutting mechanism 1 set

14. Discharging and conveying 1 set

2. Equipment technical parameters:

1. Machine size: approximately L14800W3600H2500mm (minimum transportation volume after disassembly is L2100W1600H2500mm)

2. Finished product size: The body is about L1200mmW700, the four long laces are about 600mm, the length of the laces used for welding of human-shaped belts is about 55mm, the width of the laces is about 20mm (after folding and welding, the original width is 40mm), the total fluctuation is ± 5%;

3. Material specifications:

- Body non-woven fabric W1500mm (that is, roll width), outer diameter ≤ 500mm, inner diameter 76mm, weight within 70KG, weight 40-60g/㎡

-SMS layer fabric W500mm (that is, the width of the roll), outer diameter ≤500mm, inner diameter 76mm, weight within 70KG, weight 25-50g/㎡

-Tie width 40mm, outer diameter ≤500mm, inner diameter 76mm, roll width ≤250mm, weight within 10KG, gram weight 40-60g/㎡

-Hot melt adhesive: M-898C/CM898C hot melt adhesive (storage temperature below 40°C, recommended operating temperature 140°C to 180°C, depending on comprehensive factors such as environmental speed)

3. Equipment process flow:

Automatic feeding of roll material → Automatic cutting of SMS fabric → Automatic glue spraying of SMS fabric → Automatic fitting of SMS fabric → Automatic folding and welding of edges → Automatic folding and welding of laces → Automatic welding of folded and welded laces to the body → Automatic neckline punching Cut → Automatic folding of fabric → Automatic roll welding of shoulders → Automatic roll cutting of body → Completed