The maintenance of surgical gown production equipment must be done in detail. The following are some recommended steps and precautions:

Regular Cleaning: Equipment should be thoroughly cleaned regularly to remove dust, dirt, and other contaminants. Use a mild detergent and a soft cloth to clean, avoid caustic or abrasive cleaners.

Inspection and tightening: Regularly check whether the screws, connections, etc. on the equipment are loose and tighten them in time. Loose parts may cause erratic operation or damage to the equipment.

Lubrication: Regularly lubricate the moving parts of the equipment to reduce wear and friction as recommended in the equipment manual. Use appropriate lubricant and be sure not to over-lubricate to avoid contamination.

Replace worn parts: Check and replace worn parts regularly, such as blades, bearings, etc. Wear on these components affects equipment performance and production quality.

Electrical System Inspection: Regularly inspect the equipment's electrical system and connections to ensure that wires and connectors are not damaged or aged. If any problems are found, they should be repaired by professionals immediately.

Calibration and Adjustments: Calibrate and adjust equipment regularly to ensure its accuracy and performance. This may include adjusting parameters such as pressure, speed, temperature, etc. of the machine.

Training and Operating Practices: Ensure operators are properly trained and follow correct operating practices. Improper operation may result in equipment damage or reduced performance.

Recording and monitoring: Establish an equipment maintenance recording system to record the date, content and results of each maintenance. This helps track the equipment's maintenance history and identify problems.

Shutdown maintenance: If the equipment needs to be shut down for a long time, appropriate maintenance measures should be taken, such as applying rust inhibitors, covering the equipment to prevent dust and dirt, etc.

By following these maintenance steps and precautions, you can extend the life of your surgical gown production equipment, ensure its stable operation and maintain good production quality. At the same time, it is also very important to communicate regularly with professional maintenance personnel and follow the recommendations of the equipment manufacturer.